Max capacity
200200t200 t
Manufacturer rating
Max capacity of the five models
- RT700E55 t
- ATF 60-360 t
- AC200-1200 t
- QUY250250 t
- GMK6350317.5 t
Terex AC200-1
All-terrain crane. Drives on public roads and works on site.
Key figures. From the manufacturer, beside the other four models.
Max capacity
200 t
Max boom length
68 m
Main boom: 12.4–68 m
Longest of the five: 72.2 m, QUY250.
Longest jib
33 m
Longest of the five: 61 m, GMK6350.
Counterweight
69 t
Heaviest of the five: 100 t, GMK6350.
Terex AC200-1 photos.
Outriggers on steel pads
A white Terex all-terrain crane on a building site, outriggers on steel pads and counterweight blocks stacked at the back, with a yellow crane boom rising behind it.
Building site · 1 of 3
White counterweight with red chevrons, boom rising into a blue sky
Looking up at the white counterweight of a Terex crane, lettered TEREX with red and white chevrons, as the boom rises straight into a deep blue sky.
Building site · 2 of 3
The operator’s cab from below, with its steel step
A close view from below of the Terex AC200-1 cab, with its open door, steel step and red, amber and green lights.
Building site · 3 of 3
Manufacturer specification
These are the manufacturer's figures for this model, not figures Atlas Alshraa has confirmed for its own cranes.
Lifting
- Max capacity
- 200 t
- Counterweight
- 69 t
Boom and jib
- Main boom
- 12.4–68 m
- Longest jib
- 33 m
Carrier
- Axles
- 5
- Drive
- 10x8x8
Engine and travel
- Engine
- Mercedes-Benz (DaimlerChrysler) OM 502 LA
- Engine power
- 390 kW
- Top road speed
- 85 km/h
- Gradeability
- 71 %
Dimensions and weights
- Basic weight
- 60 t
About this rating
The 200 t rating needs a special attachment and applies at a short radius we could not read reliably from the chart.
Where the figures come from
- hareket.com (opens in a new tab) · manufacturer document
Will it lift your load?
200 t is its maximum, and only at its shortest radius. Further out or higher up, it lifts less. Send us the weight, the radius and the lift height, and we will check the load chart with you.
What we need from you
- Load weight (t)
- Lift radius (m)
- Lift height (m)
